Keyence VT3-S10B Touch Panel Protective Film Repair

Ambient temperature/humidity precautions
Pay attention to the following points when installing the VT3-S10B Touchscreen Protective Film VT3 inside a control panel.
• When the ambient temperature is higher than 40°C, please use it at a maximum absolute humidity of 85% RH at 40°C.
• Do not install the VT3-S10B Front Overlay Touch Panel VT3 in a location where the ambient temperature exceeds the 0 to 50°C, or the ambient humidity exceeds the 35 to 85% RH range.
• If the ambient temperature of VT3-S10B HMI Panel Glass Protective Film exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
• Allow as much space as possible between the VT3 and surrounding structures and other components to improve maintainability, operability and ventilation.
• Do not mount the VT3-S10B Touch Digitizer Front Overlay VT3 directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
• Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.