M2I TOPRH Wireless Model TOPRHO700WD-W Overlay Glass
| Categories | M2I |
|---|---|
| Brand | VICPAS |
| Model | M2I TOPRHO700WD-W |
| Brand | M2I |
| Size | 7 inch |
| Warranty | 365 Days |
| Product Line | M2I TOPRH Wireless Model |
| Supply | TOPRHO700WD-W Touchscreen Front Overlay |
| Shipping | 2-4 workdays |
| Part Number | M2I TOPRH Wireless Model TOPRHO700WD-W |
| Terms of Payment | Western Union, T/T, PayPal, Credit Card |
| Download DOC |  |
| Update Time | May 4,2024 |
M2I TOPRH Wireless Model TOPRHO700WD-W Protective Film Touch Screen Tablet Replacement
Order each part separately is available
Fixing
Install clamps with M2I TOPRHO700WD-W Touch Screen Monitor Front Overlay product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the TOPRHO700WD-W Front Overlay Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.
Setting System Recovery Mode of TOPRHO700WD-W Protective Film Touch Digitizer Glass
a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the TOPRHO700WD-W Protective Film Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I TOPRHO700WD-W HMI Panel Glass Front Overlay is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.
Specifications:
The table below describes the parameters of the M2I TOPRHO700WD-W Protective Film Touch Panel HMI Parts.
| Warranty: | 365 Days |
| Operating Humidity: | 0 ~ 90 % |
| Display Type: | TFT Color |
| Screen Type: | Analog Resistive Film |
| Product Line: | TOPRH Wireless Model |
| Storage Temperature: | -10°C ~ +60°C |
| Operation Temperature: | 0°C ~ +50°C |
| Backlight: | Yes |
| Part Number: | TOPRHO700WD-W |
| Ambient Humidity: | 85% RH or less |
Related M2I HMI Part No. :
| M2I HMI | Description | Inventory status |
| TOPRE0400WD | M2I TOPRE Series Touch Screen Film Front Overlay Replacement | In Stock |
| TOPRH0700WD FE | M2I TOPRH Wired Series Protective Film Touch Digitizer Glass Repair | Available Now |
| TOPRW0700WD-IO | M2I TOPRW-IO Series HMI Touch Membrane Protective Film Repair | Available Now |
| TOPRW0710WD-IO | M2I TOPRW-IO Series Touch Screen Display Front Overlay Replacement | In Stock |
| M2I HMI | Description | Inventory status |
M2I TOPRH Wireless Model HMI Manuals PDF Download:
FAQ:
Question: What is the case material of M2I TOPRHO700WD-W Front Overlay Touch Panel Terminal?
Answer: The case material is PC(Flameless).
Question: What is the cooling system of TOPRH Wireless Model TOPRHO700WD-W Touch Membrane Protective Film Machine?
Answer: The cooling system of TOPRHO700WD-W is natural air circulation.
Question: What is M2I TOPRH Wireless Model TOPRHO700WD-W Touch Screen and Protective Film HMI parts price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
OPRHO700WD-WTOPRHO700D-W
TOPRHO700WDW
TOPRHHO700WD-W
TOPRHO700W-DW
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
