Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC FT1A-M14KA-S Touch Screen Monitor Replacement

IDEC FT1A-M14KA-S Touch Screen Monitor Replacement

IDEC FT1A-M14KA-S Touch Screen Monitor Replacement
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelFT1A-M14KA-S
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Digitizer Glass
Display Size3.7 inches
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeApr 28,2024
Detail Information

IDEC FT1A 3.8IN PLC+HMI FT1A-M14KA-S HMI Panel Glass Replacement


IDEC FT1A 3.8IN PLC+HMI HMI Parts FT1A-M14KA-S Touch Screen Monitor for repair replacement

Instruction for protective sheet

The Protective Sheet of FT1A-M14KA-S Touch Membrane is replaceable, transparent sheet to protect a display of HG series. With the protective sheet covered on the display, you can operate touch switches.
1. Wipe any dirt off the FT1A-M14KA-S Touch Screen Display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the FT1A-M14KA-S Touch Screen Film, then apply the protective sheet onto the display. Care should be taken to avoid the ingress of air.
4. On the top of the protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the display of HG series.

When a protective sheet of FT1A-M14KA-S HMI Touch Glass gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. This FT1A-M14KA-S Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.





Specifications:

The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-M14KA-S Touch Digitizer Glass HMI.

Brand: IDEC
Product Line: FT1A 3.8IN PLC+HMI
Display Color: 65,536 Colors
Touchscreen: Analog Resistive
Warranty: 1-Year Warranty
Display Size: 3.7"
Screen Type: TFT Color
Model Number: FT1A-M14KA-S
Operating Temperature: 0 ~ 55°C
Storage Temperature: -20 ~ 70°C


Related IDEC FT1A 3.8IN PLC+HMI No. :

FT1A 3.8IN PLC+HMI Description Inventory status
FT1A-C12RA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement In Stock
FT1A-C12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair Available Now
FT1A-C14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-C14KA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair Available Now
FT1A-C14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement In Stock
FT1A-C14SA-S IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair Available Now
FT1A-M12RA-B IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement In Stock
FT1A-M12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair Available Now
FT1A-M14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-M14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement In Stock
FT1A-M14SA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair Available Now
FT1A 3.8IN PLC+HMI Description Inventory status

IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:

  • IDEC-FT1A-SmartAXIS-Brochure
  • IDEC-FT1A-Touch-Datasheet

  • FAQ:

    Question: What is the size of the base screen of FT1A-M14KA-S Terminal?

    Answer: It is equal the size of FT1A-M14KA-S Touch Screen.


    Question: What are the screen types of FT1A-M14KA-S machine?

    Answer: The screen types of FT1A-M14KA-S HMI are base screen, popup screen and system screen.


    Question: How to maintain FT1A-M14KA-S HMI Touch Glass?

    Answer: To wipe off smears on the lens and the surfaces of FT1A-M14KA-S Touch Panel, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.

    Common misspellings: 

    T1A-M14KA-S

    FT1AM14KA-S

    FT1A-M14KA-

    FT1A-MM14KA-S

    FT1A-M14KA-SS

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?