PPC310RJ2202-T PPC310RJ2203-T PPC310RJ2301-T PPC310RJ2302-T Overlay Touchglass

Order each part separately is available

Installation Instructions

For mounting the HMI Advantech Panel PC Series PPC-310 EHL PPC310RJ2202-T PPC310RJ2203-T PPC310RJ2301-T PPC310RJ2302-T Touch Digitizer Glass Front Overlay, it is recommended that more than one person handle the installation process to ensure safety and prevent accidental damage to the Advantech HMI PPC310RJ2202-T PPC310RJ2203-T PPC310RJ2301-T PPC310RJ2302-T Protective Film Touch Screen Panel or any personal injury. When wall mounting, start by selecting the appropriate location on the wall for the wall mount plate. Proceed by marking the positions of the two plate screw holes on the wall and drilling two pilot holes at those marked locations. Next, align the wall mount plate screw holes with the pilot holes and secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them securely. Care should be taken not to drop the Advantech screen PPC310RJ2202-T PPC310RJ2203-T PPC310RJ2301-T PPC310RJ2302-T Front Overlay Touch Membrane during this process. Once the mount plate is securely attached, insert four M4 screws into the holes on the panel PC and tighten them to secure the bracket to the rear panel. It's important to double-check the stability of Advantech PPC310RJ2202-T PPC310RJ2203-T PPC310RJ2301-T PPC310RJ2302-T touch screen HMI Touch Glass Protective Film to ensure a safe and secure installation.