Touch panel screen for FPM-3121G-R3AE touch panel membrane touch sensor glass replacement repair

Introduction of Touch Screen

The Advantech HMI FPM-3121G Series FPM-3121G-R3AE Front Overlay Touchscreen uses advanced 5-wire resistive technology. It provides more accurate sensing capacity than other technologies. The HMI Advantech FPM-3121G-R3AE Touch Digitizer Glass Protective Film is specially designed for tough industrial environments, and has been approved to FCC Class A standards.

Panel Mounting

The Advantech screen FPM-3121G Series FPM-3121G-R3AE HMI Panel Screen Front Overlay offers versatile mounting options, allowing it to be easily installed on various surfaces, including desks. Additionally, the Advantech touch screen Protective Film Touch Panel can be mounted using 75*75 VESA screw holes, compatible with standard arm or mount kits. It's important to note that the recommended screw size for VESA mounting is M4 x 6.
For panel installation of the Advantech FPM-3121G-R3AE Front Overlay Touch Membrane, release the mounting brackets by removing four screws from the rear side. Then, secure them at the top and bottom using screws. To complete the panel mounting, 10 clampers with M6 * 21mm screws are required, along with a cabinet cut-out measuring 381.4 x 302.5mm.