6AG1640-0AA00-2AX1 Siemens SIMATIC TD400C Membrane Switch
6AG1640-0AA00-2AX1 Siemens SIMATIC HMI TD400C Text display Membrane Keyboard Plastic Case Shell Repair Replacement
6AG1640-0AA00-2AX1 Simens SIPLUS S7-200 TD400C -10...+60°C based on 6AV6640-0AA00-0AX1
The TD 400C Text Display is the optimal solution for all operator control and monitoring tasks of the SIMATIC S7-200. The customizable operator interface enables optimal adaptation of the device to the surroundings in which it isused.
• Display of message texts.
• Intervention in the control program, e.g. setpoint changes.
• Setting of inputs and outputs, e.g. for switching a motor on and off.
Compatibility with the TD 100C, TD 200 and TD 200C Text Displays:The TD 400C Text Display is not compatible with existing Text Displays (different mounting dimensions, configurationcannot be adopted).
VICPAS supply 6AG1640-0AA00-2AX1 Siemens TD400C membrane switch with 6 months warranty and support Urgent Worldwide Shipping.
The table below describes the parameters of the 6AG1640-0AA00-2AX1 Siemens TD400C HMI Parts.
|Part Number :||6AG1640-0AA00-2AX1|
|Number of lines:||2|
|Product Line:||Siemens TD400C|
|Rated value (DC):||24 V|
|Keyboard fonts:||US English|
|Resolution||192 x 64|
Related Siemens Simatic TD400C Part No. :
|Siemens TD400C||Description||Inventory status|
|6AV6671-0AP00-0AX0||TD400C FRONT FILM, BLANK||In Stock|
|6AV6640-0AA00-0AX1||TD 400C TEXTDISPLAY, 4 LINES||In Stock|
|SIMATIC TD400C||Description||Inventory status|
Siemens TD400C series HMI Manuals PDF Download:
Question: How to program with 6AG1640-0AA00-2AX1 Siemens TD400C ?
Answer:The configuration data of the TD 400C is stored in the CPU of the S7-200. The message texts and theconfiguration parameters are created with the STEP 7-Micro/WIN V4 SP6 programming software. Additionalparameterization software is not required. The operating front design is configured with the Keypad Designer(component part of STEP 7-Micro/WIN V4 SP6).
Special data areas are reserved in the CPU of the S7-200 for data exchange with the TD 400C. The TD 400Caccesses each of the required functions of the CPU direct via these data areas. User-friendly parameterizationtakes place via a dedicated TD 400 Wizard in STEP 7-Micro/WIN V4 SP6.
Question: Which is the design of Siemens TD400C ?
Answer:The TD 400C is connected to the S7-200 using the supplied connecting cable. A separate power supply is not required.It is also possible to connect several TD 400Cs to one S7-200.
Question: What is the 6AG1640-0AA00-2AX1 Siemens TD400C mebrane switch and shell HMI parts price?
Answer: Submit a fast quote, send VICPAS an email for best price.