Quick Service for Full HMI Parts Replacement
Home / all / Delem /

Delem DA-52s DA52s DA 52s Terminal Keypad Repair

Delem DA-52s DA52s DA 52s Terminal Keypad Repair

Delem DA-52s DA52s DA 52s Terminal Keypad Repair
CategoriesDelem
BrandVICPAS
ModelDA-52s DA52s DA 52s
BrandDelem CNC Cotrol
Warranty365 Days
SupplyDA-52s DA52s DA 52s Keypad Membrane Replacement
ModelDelem CNC Controller DA-52s DA52s DA 52s
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Update Time2022/6/29
Detail Information

Delem CNC Controller DA-52s DA52s DA 52s Membrane Keypad Keyboard Repair


Delem CNC Controller DA-52s DA52s DA 52s Membrane Keypad Repair Kit

The DA-52s DA52s DA 52s Keypad Membrane Delem CNC Controller has several programmable features. These features can be enabled or disabled in Delem DA-52s DA52s DA 52s Membrane Keypad keyboard CNC software. Depending on these features, a number of logical signals can be mapped to the I/O pins of the Delem CNC Controller DA-52s DA52s DA 52s. This means the system programmer can enable the necessary signals and assign them to input and output pins. The I/O settings are accessible from the menu of the machine parameters. It should be adjusted by authorized personnel only.


If the Delem Controller DA-52s DA52s DA 52s Keyboard Membrane CNC START or STOP button is pressed for 2 seconds in the automatic mode screen the Delem Automation Controller DA-52s DA52s DA 52s Membrane keypad CNC switch will enter its build in diagnostic screen. In total there are 3 screens, the arrow keys up and down can be used to navigate through the screens. The diagnostic mode can be switched off by pressing the STOP key for 2 seconds again.





Specifications:

The table below describes the parameters of the Delem CNC Controller DA-52s DA52s DA 52s Keyboard Membrane.

Part Number: DA-52s DA52s DA 52s
Backlight: TFT
Warranty: 365 Days
Product Line: Delem series
Input Power: 24VDC (+10%, -15%)
Display Size: 7 inch
Operating Temperature: 0 to 50 °C
Storage Temperature: -20 to +70 °C


Related Delem Series Part No. :

Delem CNC Automation Description Inventory status
DA-24e Membrane Keyboard Delem Press Brake Controller In Stock
DA-41 Delem CNC Membrane Keyboard Keypad Repair Part Available Now
DA-41s Delem Automation Membrane Keypad Switch Repair Part In Stock
DA-41T Delem CNC Controller Touch Screen Protective Film In Stock
DA-42T Delem CNC HMI Touch Panel Front Overlay In Stock
DA-51 HMI Operator Panel Keypad Delem Replacement Available Now
DA-52 Delem CNC Control Machine Operator Keyboard In Stock
DA-52P Delem CNC Keyboard Membrane Repair Kit Available Now
DA-52s Delem Industrial Keypad Membrane Replacement In Stock
DA-52s P Switch Membrane Delem Replacement Repair Available Now
DA-53 Delem Automation Membrane Keypad Switch Repair Part In Stock
Delem CNC Controller Description Inventory status


Delem HMI Manuals PDF Download:

  • Delem CNC DA51 DM51 Manual
  • Delem CNC Controller Leaflet DA-51 EN
  • Delem CNC DA-52s Manual
  • Delem DA-52s Introduction Manual
  • Press Brake Delem DA52s Operation Manual

  • FAQ:

    Question: What are the DA-52s DA52s DA 52s Membrane Keypad Keyboard HMI computing functions?

    Answer:

  • - Tooling safety zones
  • - Press force
  • - Bend allowance
  • - Crowning adjustment
  • - Developed length
  • - Bottoming force
  • - Auto bumping calculation
  • - Angle correction database


  • Common misspellings: 

    DA-5s
    A-52s
    DA5-2s
    DA-5Zs
    DAA-52s
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Do you want to quickly know the product quotation you need?