M2I X TOP-E Series XTOP05TQ-ED Touch Digitizer Glass
| Categories | M2I |
|---|---|
| Brand | VICPAS |
| Model | M2I XTOP05TQ-ED |
| Brand | M2I |
| Size | 5.7 inch |
| Warranty | 365 Days |
| Product Line | M2I X TOP-E Series |
| Supply | XTOP05TQ-ED Touch Membrane |
| Shipping | 2-4 workdays |
| Part Number | M2I X TOP-E Series XTOP05TQ-ED |
| Terms of Payment | Western Union, T/T, PayPal, Credit Card |
| Download DOC |  |
| Update Time | May 2,2024 |
M2I X TOP-E Series XTOP05TQ-ED Touch Screen Glass Replacement
Fixing
Install clamps with M2I XTOP05TQ-ED Touch Screen Monitor product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the XTOP05TQ-ED Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.
Setting System Recovery Mode of XTOP05TQ-ED Touch Digitizer Glass
a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the XTOP05TQ-ED Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I XTOP05TQ-ED HMI Panel Glass is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.
Specifications:
The table below describes the parameters of the M2I XTOP05TQ-ED Touch Panel HMI Parts.
| Warranty: | 365 Days |
| Brand: | M2I |
| Display Type: | TFT Color |
| Display Resolution: | 320 x 240 Pixels |
| Product Line: | X TOP-E Series |
| Display Color: | 65536 Color |
| Operation Temperature: | 0°C ~ +50°C |
| Storage Temperature: | -10°C ~ +60°C |
| Ambient Humidity: | 85% RH or less |
| Part Number: | XTOP05TQ-ED |
Related M2I HMI Part No. :
| M2I HMI | Description | Inventory status |
| CTOP2M-A | M2I C Top Series Touch Screen Tablet Front Overlay Replacement | In Stock |
| CTOP2M-B | M2I C Top Series Protective Film Touch Panel Glass Repair | Available Now |
| CTOP3M | M2I C Top Series Front Overlay Touch Membrane Replacement | In Stock |
| XTOP05MQ-ED | M2I X Top-E Series HMI Touch Glass Protective Film Repair | Available Now |
| XTOP05MQ-ED-E | M2I X Top-E Series Touch Screen Display Front Overlay Replacement | In Stock |
| XTOP05TQ-ED | M2I X Top-E Series Protective Film HMI Panel Screen Repair | Available Now |
| XTOP05TQ-ED-E | M2I X Top-E Series Touch Digitizer Front Overlay Replacement | In Stock |
| XTOP08TV-ED | M2I X Top-E Series Touch Screen Film Protective Film Repair | Available Now |
| XTOP08TV-ED-E | M2I X Top-E Series Front Overlay Touch Digitizer Glass Replacement | In Stock |
| XTOP10TV-ED | M2I X Top-E Series Protective Film Touch Membrane Repair | Available Now |
| XTOP10TV-ED-E | M2I X Top-E Series Touch Screen Tablet Front Overlay Replacement | In Stock |
| M2I HMI | Description | Inventory status |
M2I X TOP-E Series HMI Manuals PDF Download:
FAQ:
Question: What is the case material of M2I XTOP05TQ-ED Touch Panel Terminal?
Answer: The case material is PC(Flameless).
Question: What is the cooling system of X TOP-E Series XTOP05TQ-ED Touch Membrane Machine?
Answer: The cooling system of XTOP05TQ-ED is natural air circulation.
Question: What is M2I X TOP-E Series XTOP05TQ-ED Touch Screen HMI parts price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
TOP05TQ-EDXTOP05TQED
XTOP05T-QED
XTOP05TQE-D
XTOP05TQ-DE
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
