PPC31502102E-T PPC31502103E-T PPC31502104E-T PPC31502201E-T Touchglass Overlay LCD

Disassembling Method

To disassemble the components, follow these steps: Start by removing the rear cover, ensuring caution not to drop the Advantech HMI Panel PC Series PPC-3150 PPC31502102E-T PPC31502103E-T PPC31502104E-T PPC31502201E-T LCD Panel Front Overlay Touch Screen Glass while undoing the 15 screws. Proceed to take out the control board with 3 screws, followed by the AD board with 4 screws. Detach the power board by unscrewing 4 screws, ensuring the Advantech screen PPC31502102E-T PPC31502103E-T PPC31502104E-T PPC31502201E-T Touch Panel LCD Display Front Overlay is disconnected. Next, remove the LO bracket with 3 screws. Prior to disassembling 9 screws and 4 posts to remove the middle bracket, remove the HMI Advantech PPC31502102E-T PPC31502103E-T PPC31502104E-T PPC31502201E-T Touch Digitizer Glass Protective Film LCD Display Screen. Separate the LCD bracket left and right from the LCD module by undoing 4 screws. Then, remove the LED board by disassembling 1 screw. Lastly, remove the waterproofing from the front bezel of the Advantech touch screen PPC31502102E-T PPC31502103E-T PPC31502104E-T PPC31502201E-T LCD Display Panel Protective Film HMI Panel Screen.