FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Protective Film Touchpad
FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Protective Film Touchpad
| Categories | Other Advantech HMI |
|---|---|
| Brand | VICPAS |
| Model | FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T |
| Warranty | 365 Days |
| Shipping | 2-4 workdays |
| Brand | Advantech |
| Product Line | FPM-2150G Series |
| Supply Parts | Touch Screen Monitor Front Overlay |
| Display Type | TFT LCD |
| Touchscreen | 5-Wire-Analog-Resisitive |
| FOB port | Guangzhou, Shenzhen, Hongkong |
| Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union |
| Download DOC |  |
| Update Time | May 2,2024 |
Advantech FPM-2150G Series FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Front Overlay Touch Screen Display Replacement
Mounting Instruction
When mounting the HMI Advantech FPM-2150G Series FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Touch Digitizer Glass Front Overlay, more than one person should perform the installation. Be careful and prevent accidental damage to the Advantech HMI FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Protective Film Touch Screen Panel or personal injury.
Wall Mounting
1. Select the location on the wall for the wall mount plate.
2. Mark the locations of the two plate screw holes on the wall.
3. Drill two pilot holes at the marked locations on the wall.
4. Align the wall mount plate screw holes with the pilot holes.
5. Secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them. Be careful not to drop the Advantech screen FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Front Overlay Touch Membrane to the ground.
6. Insert four M4 screws into the holes on the panel PC and tighten them to secure the bracket to the rear panel. Check the stability of Advantech FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T touch screen HMI Touch Glass Protective Film again.
7. To mount the panel PC on the wall, align the wall mount bracket attached to the panel PC with the wall mount plate on the wall and slide the panel PC downward to hang the bracket on the mount plate.
8. Secure the panel PC in place by tightening the screws into the wall mount bracket.
Specifications:
The table below describes the parameters of the Advantech FPM-2150G Series FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T HMI Touch Glass Front Overlay.
| Warranty: | 1-Year Warranty |
| Light Transmission: | 80% |
| Brand: | Advantech |
| Operating Temperature: | -10 ~ +60°C |
| Product Line: | FPM-2150G Series |
| Environment: | Free From Corrosive Gases |
| Front Panel Protection: | IP65 |
| Storage Temperature: | -40 ~ +80°C |
| Touchscreen: | 5-Wire Analog Resisitive |
| Display Type: | TFT LCD |
Related Advantech HMI No. :
| Advantech HMI | Description | Inventory status |
| FPM-2150GR3B1801-T | Advantech Touch Screen Film Front Overlay Replacement | In Stock |
| FPM-2150GR3B1802-T | Advantech Protective Film Touch Screen Repair | Available Now |
| FPM-2150GR3B1803-T | Advantech Touch Panel Front Overlay Replacement | In Stock |
| FPM-2150GR3B1804-T | Advantech Protective Film Touch Membrane Repair | Available Now |
| FPM-2150G-R3BE | Advantech Touchscreen Front Overlay Replacement | In Stock |
| FPM2150GRCE0001E-T | Advantech Front Overlay Touch Screen Film Repair | Available Now |
| FPM-2150G-RDE | Advantech Touch Screen Glass Protective Film Replacement | In Stock |
| FPM-2150G-X0AE | Advantech HMI Touch Glass Front Overlay Repair | Available Now |
| UTC-520D-RE | Advantech Protective Film Touch Screen Monitor Replacement | In Stock |
| UTC-520FR-ATB0E | Advantech Touch Screen Display Front Overlay Repair | Available Now |
| UTC-520GR-ATB0E | Advantech Protective Film Touch Screen Tablet Replacement | In Stock |
| UTC-520HR-ATB0E | Advantech Front Overlay Touch Digitizer Repair | Available Now |
| UTC-520IR-ATB0E | Advantech Touch Panel Protective Film Replacement | In Stock |
| UTC-520JR-ATB0E | Advantech Protective Film Touchscreen Repair | Available Now |
| UTC-532IP-ATB0E | Advantech Touch Panel Front Overlay Replacement | In Stock |
| Advantech HMI | Description | Inventory status |
Advantech HMI Manuals PDF Download:
FAQ:
Question: How do I calibrate the touch screen on Advantech FPM-2150G series HMI?
Answer: To calibrate the touch screen, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Question: Which way can I finish the mounting without causing damage to Advantech FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Touch Digitizer Glass Front Overlay?
Answer: Wall mounting, panel mounting, arm mounting and stand mounting will not do damage to Advantech FPM-2150GR3B1701-T FPM-2150GR3B1702-T FPM-2150GR3B1703-T Touch Panel Protective Film.
Common misspellings:
PM-2150GR3B1701-T
FPM-150GR3B1701-T
FPM-22150GR3B1701-T
FP-2150GR3B1702-T
FPM-22150GR3B1702-T
FPM-2150GR3B170-2T
FPM-2150GR3B1703T
FP-M2150GR3B1703-T
FPM-2150GR3B1703T-
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
