AB304-S/FACT AB135-S/FACT AB265-S/FACT Keypad Membrane

FAQ:

Question: What to do if the AB304-S/FACT AB135-S/FACT AB265-S/FACT Operator Panel Keypad scale is overloaded?

Answer:
· Check the maximum capacity of your model (AB304-S: 310g, AB135-S: 120g, AB265-S: 260g) and ensure that the sample does not exceed this limit.
· Remove excess weight and restart the balance to clear the error.
· Ensure no external pressure (such as a resting hand or object) is applied to the weighing pan.
· If the error persists without excessive weight, the balance may have been damaged—contact technical support for further assistance.

Question: Why is the AB304-S/FACT AB135-S/FACT AB265-S/FACT Membrane Switch Keypad balance showing unstable readings or fluctuating values?

Answer: If the balance is not stabilizing properly, consider these factors:
· Ensure a stable environment: Place the balance on a solid, vibration-free surface, away from air currents, electronic interference, or temperature fluctuations.
· Check the weighing pan: Make sure the pan is properly installed and free of dirt or external forces.
· Allow warm-up time: If the balance was just turned on, let it warm up for at least 30 minutes before use.
· Use FACT calibration: The built-in Fully Automatic Calibration Technology (FACT) ensures accurate readings—check if it has been recently triggered. · If instability persists, reset the balance settings or contact technical support.