IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Protective Film Plastic Cover

GE Fanuc Series 90-30 CPU Modules IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Plastic Cover Body Protective Film
Order each part separately is available

Maintenance is often a bottleneck in industrial operations, especially when modules are exposed or difficult to access. VICPAS IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Plastic Shell Front Overlays simplify routine checks, allowing technicians to perform maintenance safely and efficiently without removing multiple components.
Exposed modules increase the risk of accidental contact, which can lead to short circuits or component damage. Our IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Front Overlay Enclosures organize and shield the modules, reducing errors and making maintenance safer for personnel.
Replacement is quick and intuitive. Technicians can swap housings without complex adjustments or special tools, minimizing downtime and keeping production lines moving. This is particularly valuable in plants with high throughput or tight schedules.
The materials used in VICPAS IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Outer Casing Protective Films are lightweight yet strong, so handling during maintenance is easier without compromising protection. Modules are secure but still accessible when needed, balancing safety and practicality.
By simplifying maintenance and replacement, these IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Protective Film Outer Coverings allow your team to focus on optimizing operations rather than dealing with unexpected equipment failures. This improves efficiency, reduces stress, and enhances overall workflow reliability.
Specifications:
The table below describes the parameters of the GE-Fanuc Series 90-30 CPU Modules IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Plastic Housing Front Overlay Modules.
| EZ Program Store Device: | Yes |
| Total Baseplates per System: | 8 |
| Battery Backed Clock: | Yes |
| Product Line: | Series 90-30 CPU Modules |
| Storage Temperature: | –40 °C to +85°C |
| Brand: | VICPAS |
| Timers/Counters: | >2,000 |
| Part Number: | IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX |
| Operating Temperature: | 0° C to 60° C (Inlet) |
| Warranty: | 365 days Warranty |
Related GE Series 90-30 CPU Modules Part No. :
| GE Fanuc Series 90-30 | Description | Inventory status |
| GE Fanuc 90 30 Series | Description | Inventory status |
GE Series 90-30 CPU Modules Manuals PDF Download:
FAQ:
Question: Can I order in bulk or for multiple module types?
Answer: Yes, bulk orders are supported. Please specify the module models and quantities when placing your order.
Question: How to insert a Series 90-30 IC693CPU374-GV IC693CPU374-FN IC693CPU374-HX Module?
Answer: Use the following instructions as a guide when inserting a module into its slot in a baseplate.
1. Make sure that power to the PLC is turned off.
2. Select the slot into which the module is to be inserted. Grasp the module firmly with terminal board toward you and with rear hook facing away from you.
3. Align module with desired base slot and connector. Tilt module upward so that top rear hook of module engages slot on baseplate.
4. Swing module downward until connectors mate and lock-lever on bottom of module snaps into place engaging the baseplate notch.
5. Visually inspect the module to be sure that it is properly seated.


Common misspellings:
IC693CPU374-GV IC693CPU374-FN IC693CPU374-XIC693CPU374-GV IC693CPU74-FN IC693CPU374-HX
I6C93CPU374-GV IC693CPU374-FN IC693CPU374-HX
IC693CPU374-GV IC693CPU3T4-FN IC693CPU374-HX
IC693CPU374-GV IC693CPU374-FN IC693CPU3744-HX
- Loading...
- Phone
- *Title
- *Content
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Phone
- *Title
- *Content






Fast Quote