Quick Service for Full HMI Parts Replacement
Home / All / EATON Micro Panel / Cutler-Hammer Panelmate / HMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display Replacement

HMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display Replacement

HMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display Replacement
HMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display ReplacementHMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display ReplacementHMI04CU HMI04BU HMI04GU Front Overlay Touch Screen Display Replacement
Share
CategoriesCutler-Hammer Panelmate
BrandVICPAS
ModelHMI04CU HMI04BU HMI04GU
Product LineCutler-Hammer Panelmate
Warranty1 Year
Shipping Time3-5 Days
Supply PartsTouch Screen Tablet Protective Film
EnvironmentFree From Corrosive Gases
Size4''
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Detail Information

Eaton HMI04CU HMI04BU HMI04GU Protective Film Touch Screen Monitor Repair

Order each part separately is available

Eaton HMI04CU HMI04BU HMI04GU Front Overlay Touch Membrane Replacement

1. Never use foreign objects to activate Eaton Panelmate HMI04CU HMI04BU HMI04GU Touch Digitizer Glass Front Overlay. Use a hand, gloved hand or stylus. Foreign objects (such as a screwdriver) may cause damage to the touchscreen or scratch the front panel reducing visibility of the display.
2. Use a light touch to activate the touchscreen. Touchscreen activation does not require the same force necessary to activate a mechanical switch.
3. Disconnect Eaton Cutler Hammer HMI04CU HMI04BU HMI04GU Protective Film Touch Screen Tablet from the power outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
4. Do not remove or insert the CompactFlash memory card while the PanelMate ePro PS unit is powered up. Doing so may cause damage to the CompactFlash memory and/or processor board.
5. Keep this equipment away from condensing humidity.
6. Put Cutler Hammer Panels HMI04CU HMI04BU HMI04GU HMI Touch Glass Front Overlay on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection cooling. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8. Always install the unit in a vertical orientation for proper cooling.
9. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
10. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
11. All cautions and warnings on the equipment should be noted.




Specifications:

The table below describes the parameters of Eaton Cutler-hammer Eaton HMI04CU HMI04BU HMI04GU Protective Film Touch Panel.

Size: 4''
Operating Temperature: 0 °C ... +50 °C
Shipping Time: 3-5 Days
Storage Temperature: -20 °C ... +60 °C
Environment: Free From Corrosive Gases
Product Line: Cutler-Hammer Panelmate
Brand: Vicpas
Cooling Method: Natural Air Cooling
Relative Humidity: 95%
Warranty: 365 Days


Related Eaton Cutler-Hammer Panelmate Part No. :

Cutler-Hammer Panelmate HMI Description Inventory status
Cutler-Hammer Panelmate HMI Description Inventory status

Eaton Cutler-Hammer Panelmate Manuals PDF Download:

  • Operator Interface Catalog.pdf
  • PanelMate Series 1000 Product Manual.pdf
  • Cutler Hammer Eaton MM PM10300C Datasheet.pdf
  • PanelMate 5000 Series.pdf
  • PanelMate Power Pro 5000 Models 5785K, 5785T, 5485K.pdf
  • PM 1700 touchpad express setup updated.pdf
  • Eaton Cutler Hammer 1570KHX PM1500 Power Series Datasheet.pdf

  • FAQ:

    Question: What is the Offline Mode Menu used for?

    Answer: The Offline Mode Menu is a built-in utility interface that allows users to access diagnostic, setup, and maintenance functions on the PanelMate unit. In Offline Mode, users can perform operations such as keypad or touchscreen testing, display adjustment, system diagnostics, and other troubleshooting tasks without affecting normal machine operation.
    For keypad units, Offline Mode can be entered by pressing the upper two control buttons simultaneously after power-up diagnostics are completed. For touchscreen units, Offline Mode can be accessed by pressing the lower-right corner of the touchscreen during startup.
    What is the Offline Mode Menu used for?


    Question: Do I need to press harder when operating the touchscreen with gloves?

    Answer: No. Eaton HMI04CU HMI04BU HMI04GU Touch Membrane Front Overlay is designed for both finger and gloved operation and does not require strong actuation force like a mechanical switch. A light touch provides the same response as a heavy press, helping ensure comfortable and reliable operation.


    Common misspellings: 

    HMIO4CU
    HM04CU
    HMI04UC
    HMI044BU
    HMI4BU
    HMII04BU
    HMI40GU
    HMI104GU
    HMI0GU
    Review
    • Loading...
    Please send your message to us
    *Email
    Phone
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Phone
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web