EW107BD300 Touch Digitizer Glass Replacement

Order each part separately is available

During transportation and storage, ESA Web Panel EW107BD300 HMI Touch Glass should be protected from excessive mechanical stress, shocks, vibrations, pressure, and moisture, as these conditions may damage the unit if it is not properly packaged. Damaged packaging may indicate that the device has already been exposed to unfavorable environmental conditions. For this reason, the use of the original packaging is strongly recommended whenever the product is transported or stored. If EW107BD300 Touch Digitizer Glass is transported in cold weather or subjected to significant temperature changes, care should be taken to prevent condensation from forming on or inside the unit, as moisture may cause electrical short circuits and damage internal components. To minimize the risk of moisture exposure, always store Web Panel EW107BD300 Touch Membrane in a dry environment and allow it to reach room temperature before powering it on. If condensation is present, wait approximately 12 hours to ensure the device is completely dry before switching it on.