6AG1688-3XY38-2AX0 6AG1688-3AY36-2AX0 Membrane Keypad Switch

FAQ:

Question: How to mount the 6AG1688-3AY36-2AX0 6AG1688-3XY38-2AX0 Membrane Keyboard HMI device?

Answer:

1. Insert the HMI device into the mounting cut-out.
2. Insert a mounting clamp into a recess on the HMI device.
3. Fasten each mounting clamp by tightening the screw.
The permitted torque is 0.2 Nm.
4. Repeat step 2 and 3 until all required mounting clamps are fastened.

Question: How to Connect the EMERGENCY STOP button?

Answer:

1. Connect the EMERGENCY STOP button as follows to the connector for the fail-safe digital inputs:
– Sensor supply VS.0 for the FI.0 input
– Sensor supply VS.1 for the FI.1 input
– Sensor supply VS.2 for the FI.2 input
– Sensor supply VS.3 for the FI.3 input
The following connection options are available:

The EMERGENCY STOP button must be connected as an equivalent NC contact. Observe the respective setting for "Evaluation of the sensor" in the configuration.

Question: What is the 6AG1688-3AY36-2AX0 6AG1688-3XY38-2AX0 Siemens KP8 series HMI parts price?

Answer: Submit a fast quote, send VICPAS an email for best price.