John Deere GreenStar 2600 Monitor Touchscreen Repair
Supply John Deere GreenStar 2600 Monitor Touchscreen Panel LCD Display for Repair Replacement
VICPAS supply touch screen panel and Lcd display for John Deere GreenStar 2600 Monitor repair replacement, all of them are brand new with 365 days VICPAS warranty.
GreenStar 2 (GS2) 2600 Monitor Display requires one of any three - Reverse, Neutral, or Curves/Circles signal from the SSU to allow AutoTrac to activate. SSU Software = All listed software versions are THE LATEST PRODUCTION versions to operate the GS2 system.
Custom Performance Website will provide a listing of all factory installed SSU software version numbers.ASSEMBLY # is the Custom Performance Website Software number. APPLICATION # is the actual 6 digit software number you will view on the vehicle when looking in diagnostic mode on the SSU.
On John Deere GreenStar 2600 screen coverage maps serve as a visual reference to the operator to ensure complete coverage of the field. This is especially important in applications where coverage is not easily seen by looking at the field, such as spraying and spreading operations, as well as planting or notill seeding. Only one Coverage map may be stored per field and only one map may be stored when no field is selected. Coverage maps are stored in the internal memory of the display until they are cleared by the operator
More information about John Deere GreenStar 2600 Monitor downland the GreenStar 2600 Monitor display operator's Manual PDF
Specifications:
The table below describes the parameters/Specifications of the John Deere GreenStar 2600 Monitor Touchscreen Panel Glass LCD Display.
Part Number : | GreenStar 2600 Monitor |
Product Line: | John Deere |
Screen diagonal | 10.4'' |
Warranty: | 365 Days Warranty |
Input Power | 24 VDC |
Patient type: | Adult, paediatric |
Inspiration time: | 0.2 to 10 s |
Input Type: | Touchscreen |
Power consumption | Typically approx. 125 W |
Digital output | RS 232 C interface |
Related John Deere Monitor Series Part No. :
John Deere Monitor | Description | Inventory status |
John Deere GS2 1800 Display | 7" TFT color touch screen, RS232 (9-pin) connectors, RJ 45 Ethernet connectors | In Stock |
John Deere GreenStar 2100 Display | 10.4" TFT LCD color touch screen, via two RS 232 C interfaces | Available |
John Deere GreenStar 2600 Monitor | 10.4” TFT color touch screen, RJ 45 Ethernet & 2 external RS232 (9-pin)connectors, | In Stock |
John Deere 2630 monitor | Deere 2630 monitor Display Touch Screen Panel Keypad | In Stock |
John Deere 4200 Display | 8.4 TFT color touch screen, via an RS 232 C interface | Available |
GreenStar 4240 Universal Display | 8.4 TFT colour touch screen, Valve response time T0…90 ≤ 5 ms | In Stock |
John Deere 4640 Universal Display | TFT colour touch screen, Digital output and input via an RS 232 C interface | Contact |
John Deere Display | Description | Inventory status |
John Deere GreenStar 2600 Monitor Manual Brochure PDF Download:
FAQ:
Question:How to get started John Deere GreenStar 2600 Monitor
Answer:The GreenStar 2600 display is primarily used as an operator interface for guidance and documentation applications.
The primary navigational point of the display is the touchscreen which allows the operator to input informationby touching the screen. The 2600 can also use the display control which allows use of input buttons andthumb wheel.
GreenStar Basics SoftwareThe display comes standard with a basic software featureset:
- • Manual Guidance
- • Documentation (field and harvest)
- • OnScreen Mapping
- • Prescriptions
- • ISOBUS VT functionality
When connected to a GPS receiver, the system allowsthe operator to drive vehicle with the aid of GPS. Whencombined with an optional AutoTrac activation, andvehicle steering kit, system can automatically guidemachine though the field.
Documentation can be used to record data tied to GPScoordinates. On some machines, rates, yield, implementwidth, or other information is recorded from the vehicleCAN Bus. The displays can also be connected to certain3rdParty control units to record rate information. Thisdata is collected on the compact flash card and can beunloaded into desktop software to produce maps andreports of field activities.
Question:How to use Screen Protector in John Deere GreenStar 2600 Monitor Display?
Answer:The use of a screen protector is recommended to preventwear to the touchscreen surface. Screen protector kits,made specifically for GS2 displays, can be purchasedthrough your local John Deere dealer.
Screen protector has been preinstalled on the touch panel of your display. Removing protector reduces thesunlight readability of the display. Please see instructions for replacement when necessary.
Question: What is the John Deere GreenStar 2600 Monitor touchscreen keypad price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common Other Names
John Deere GreenStar 2600 Monitor
john deere greenstar 2600 display
john deere greenstar 2600 touch screen
john deere greenstar 2600
john deere 2600 monitor
john deere 2600 display
john deere greenstar monitors
jd 2600 display
deere 2600 display
john deere 2600 touch screen
john deere 2600 screen replacement
john deere 2600 display repair
john deere 2600
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content