Quick Service for Full HMI Parts Replacement
Home / All / Schneider / For Schneider Membrane Keyboard Repair /

XBTNU400 Schneider HMI Operator Panel Keypad Repair

XBTNU400 Schneider HMI Operator Panel Keypad Repair

XBTNU400 Schneider HMI Operator Panel Keypad Repair
XBTNU400 Schneider HMI Operator Panel Keypad RepairXBTNU400 Schneider HMI Operator Panel Keypad RepairXBTNU400 Schneider HMI Operator Panel Keypad Repair
CategoriesFor Schneider Membrane Keyboard Repair
BrandVICPAS
ModelXBTNU400
Keypad Button MaterialMetal
Membrane MaterialPlastic
ApplicationIndustry Equipment
Place of OriginChina
BrandSchneider
Terms of PaymentWestern Union, T/T, PayPal, T/T ,Credit Card, Western Union
Download
Update TimeJun 13,2024
Detail Information

Schneider Magelis HMI XBTNU400 Membrane Keypad Switch Repair Kit

Order each part separately is available

Magelis Schneider HMI XBTNU400 Membrane Keyboard Keypad Repair Kit

VICPAS supply XBTNU400 Schneider Magelis Membrane Keypad Switch with 365 Days warranty and support Urgent Worldwide Shipping.


The XBT NU400 Membrane Keypad Keybaord polls the missing equipment, i.e., a starter, every 5 minutes. This time interval has been selected due to performance and system validation reasons. The XBT NU400 Keyboard Membrane Terminal is delivered with a unique pre-loaded application for communication with up to 8 TESYS model U starters. However, in the final system configuration, less than 8 starters may be used permanently as a normal installation. In this case, polling the missing starter(s) in too short time intervals will drastically decrease the communication with the connected starters. This, in turn, may lead to increased response times and cause critical application issues. In some cases, time between operator action and starter acknowledgement can be longer than 20 seconds. This is why the polling time of non-connected equipment has been set to this much longer period of 5 minutes. The pre-loaded application in Magelis Schneider XBTNU400 Terminal keypad HMI in version 2.2 and later provide a page for manually resetting the communication. During this manual restart of the terminal the reconnected devices will be detected.




Specifications:

The table below describes the parameters of the XBTNU400 Schneider Terminal Membrane Keyboard Keypad.

Part Number: XBTNU400
Display device: Green backlit LCD
Data Entry: Via keypad
Warranty: 365 Days Warranty
Material: Polyester or Polycarbonate
Rated Voltage: DC 5V 1mA
Operating Temp.: -10℃~+80℃
Storage Temp.: -20℃~+70℃
Conductive Trace: Silver or Copper
Life Cycle: 5 Million Cycles(up to)


Related Schneider XBT N/R/RT Series Part No. :

Schneider XBT N/R/RT Description Inventory status
XBTN200 Schneider Mgelis XBT N Operator Keyboard Repair In Stock
XBTN400 Schneider Mgelis XBT N Membrane Keypad Keyboard In Stock
XBTN401 Magelis HMI XBT N Schneider Keyboard Membrane Replacement Available Now
XBTN410 Magelis Schneider XBT N Switch Membrane Repair In Stock
XBTNREQ3841G3 XBT N Schneider Magelis HMI Terminal Keypad Available Now
XBTNU400 Schneider Magelis XBT N Keyboard Membrane Repair In Stock
XBTPREQ3675G1 Schneider Terminals Membrane Keypad Keyboard In Stock
XBTR400 Schneider Magelis XBT R Switch Membrane Repair In Stock
XBTR410 Schneider XBT R Membrane Keypad Replacement Available Now
XBTR411 Magelis Schneider XBT R HMI Switch Membrane Repair Available Now
XBTRT500 Magelis XBT RT Keyboard Membrane Replacement In Stock
XBTRT511 Schneider Magelis XBT RT HMI Switch Membrane Repair Available Now
Magelis XBT N/R/RT Description Inventory status


Schneider Magelis HMI Manuals PDF Download:

  • Schneider MAGELiS® Operator Terminals Guide
  • Schneider MAGELiSä XBT Operator Interface Brochure
  • Magelis™ XBTN and XBTR Small Panels PDF
  • Schneider Magelis_XBTN_XBTNU400 Product Datasheet
  • Magelis Schneider XBT N_R_RT Compact Display Units User Manual

  • FAQ:

    Question: What is the XBTNU400 Magelis Schneider Membrane Keypad Switch HMI price?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Question: How to connect Schneider Magelis XBT N410 / N401 / NU400 / R410 / R411 to a PC?

    Answer: XBT N410 / N401 / NU400 / R410 / R411 terminals can be connected to a PC in 2 different ways:
     via the serial port of the PC using the Schneider cable XBT Z915
     via the USB port of the PC using the Schneider cables XBT Z925 and TSXCUSB485
    How to connect Magelis Schneider Terminal XBT N200 / N400 / R400 to a PC?
    How to connect Schneider Magelis XBT N410 / N401 / NU400 / R410 / R411 to a PC?


    Common misspellings: 

    XBTNU40
    XTNU400
    XBTN4U00
    XBTNU4oo
    XXBTNU400
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web