1201-800 A TTI 1301-X911 01 HMI Touch Screen Monitor
1201-800 A TTI 1301-X911 01 TTI HMI Touch Panel Repair Replacement
The enclosure support to fix the 1201-800 A TTI 1301-X911 01 touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The enclosure edge must be between the View area and the guaranteed active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the 1201-800 A TTI 1301-X911 01 touch screen panel glass are conductive so do not touch any metal parts after mounting.
1201-800 A TTI 1301-X911 01 Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the 1201-800 A TTI 1301-X911 01 panel when cleaning, again for safety reasons.
The table below describes the parameters of the 1201-800 A TTI 1301-X911 01 Touch Screen.
|Product Line:||TTI Touch Panel|
|Number of Touches:||Single|
|Operating Temperature (*):||-5˚C to 60˚C|
|Storage Temperature:||-20˚C to 70˚C|
|Touch Size:||10.4 inch|
|Response time:||≦ 30ms|
|Operating Humidity:||20% to 85% RH|
|Tail Options:||FPC tail|
|Storage Humidity:||10% to 90% RH|
Related TTI Touch Screen HMI Part No. :
|TTI Touch Screen||Description||Inventory status|
|0516-X123 03-TW||TTI Touch Screen Glass Replacement||In Stock|
|1201-120R B TTI 1201-X111 07-NA 1201-X111/04 NA||TTI Touch Screen Panel Replacement||Available Now|
|1201-680 B TTI||TTI HMI Touchscreen Repair Part||In Stock|
|1201-800 A TTI 1301-X911 01||TTI HMI Touch Screen Glass Repair||Available Now|
|1201-X151 A TTI 1201-X151 02||TTI Touch Screen Panel Replacement||In Stock|
|1201-X231 03 1305-524 C TTI||TTI Touch Membrane Replacement||In Stock|
|1301-010 02||TTI HMI Touch Glass Replacement||In Stock|
|1301-X161 A TTI 1301-161 D TTI||TTI HMI Panel Glass Replacement||Available Now|
|1301-840 A TTI 1201-X131-01 T010-1201-X131-01||TTI Touch Digitizer Glass Repair||Available Now|
|1301-910 BTTI 1301-X911 01||TTI Touch Screen Monitor Repair||In Stock|
|1301-X161 1301-161 B TTI||TTI HMI Touch Panel Replacement||Available Now|
|1301-X991 02-NA||TTI HMI Touchscreen Repair Part||In Stock|
|TTI Touch Panel||Description||Inventory status|
Question: What is the warranty of the 1201-800 A TTI 1301-X911 01 HMI Panel Glass?
(1) Products warranty
1201-800 A TTI 1301-X911 01 Touch Digitizer Glass comes with a 1-year guaranty. VICPAS guaranty provides for repair and replacement without any charge during this period. VICPAS reserves the right in its sole discretion to determine the defects received and will take responsibility if there is any defect or damages.
The limited warranty does not cover the following situations:
Notice: VICPAS is not responsible for the following situation:
1. Damages caused by improper handling from clients, including shipping, installation and integration.
2. Damages caused by either natural or human factors after receiving the products.
3. Damage caused by self-repairs, modifications or disassembling of the product.
4. Damage caused by user error, failing to follow normal operation procedures or using paper tools.
(2) Appearance warranty
1. Cosmetic defects should be reported to VICPAS within 6 months after delivery. Should there be any discrepancy, VICPAS is to perform inspection, upon product return, based on the mutually recognized specifications and determine which party is accountable.
2. Cosmetic defects caused by improper handling from clients will not be covered under standard warranty.
1201-800 A TTI 131-X911 01
101-800 A TTI 1301-X911 01
1201-800 A TTI 1301-X191 01
1201-800 A TTI 1301-X911 O1
120L-800 A TTI 1301-X911 01
1201-800 A TTI 13301-X911 01
1201--800 A TTI 1301-X911 01