Quick Service for Full HMI Parts Replacement
Home / all / Touch Screen Panel supplier / TTI Touch Panel /

1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Monitor

1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Monitor

1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Monitor
1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Monitor1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Monitor
CategoriesTTI Touch Panel
BrandVICPAS
Model1301-X161 1301-161 B TTI TP-3174S2
Warranty365 Days
Shipping2-4 workdays
BrandTTI Touch Screen
Touch screen panel typeResistance touch screen
Display Size6 inch
Supply PartsTTI Touchscreen Panel Glass HMI Spare Part
Part Number1301-X161 1301-161 B TTI TP-3174S2
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update Time2022/6/28
Detail Information

1301-X161 1301-161 B TTI TP-3174S2 TTI HMI Touch Panel Repair Replacement


1301-X161 1301-161 B TTI TP-3174S2 Touch Screen Panel repair replacement

The enclosure support to fix the 1301-X161 1301-161 B TTI TP-3174S2 touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The enclosure edge must be between the View area and the guaranteed active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the 1301-X161 1301-161 B TTI TP-3174S2 touch screen panel glass are conductive so do not touch any metal parts after mounting.


1301-X161 1301-161 B TTI TP-3174S2 Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the 1301-X161 1301-161 B TTI TP-3174S2 panel when cleaning, again for safety reasons.




Specifications:

The table below describes the parameters of the 1301-X161 1301-161 B TTI TP-3174S2 Touch Screen.

Product Line: TTI Touch Panel
Warranty: 1-Year Warranty
Number of Touches: Single
Operating Temperature (*): -5˚C to 60˚C
Storage Temperature: -20˚C to 70˚C
Touch Size: 6 inch
Response time: ≦ 30ms
Operating Humidity: 20% to 85% RH
Tail Options: FPC tail
Storage Humidity: 10% to 90% RH


Related TTI Touch Screen HMI Part No. :

TTI Touch Screen Description Inventory status
0516-X123 03-TW TTI Touch Screen Glass Replacement In Stock
1201-120R B TTI 1201-X111 07-NA 1201-X111/04 NA TTI Touch Screen Panel Replacement Available Now
1201-680 B TTI TTI HMI Touchscreen Repair Part In Stock
1201-800 A TTI 1301-X911 01 TTI HMI Touch Screen Glass Repair Available Now
1201-X151 A TTI 1201-X151 02 TTI Touch Screen Panel Replacement In Stock
1201-X231 03 1305-524 C TTI TTI Touch Membrane Replacement In Stock
1301-010 02 TTI HMI Touch Glass Replacement In Stock
1301-X161 A TTI 1301-161 D TTI TTI HMI Panel Glass Replacement Available Now
1301-840 A TTI 1201-X131-01 T010-1201-X131-01 TTI Touch Digitizer Glass Repair Available Now
1301-910 BTTI 1301-X911 01 TTI Touch Screen Monitor Repair In Stock
1301-X161 1301-161 B TTI TTI HMI Touch Panel Replacement Available Now
1301-X991 02-NA TTI HMI Touchscreen Repair Part In Stock
TTI Touch Panel Description Inventory status

FAQ:

Question: What is the warranty of the 1301-X161 1301-161 B TTI TP-3174S2 HMI Panel Glass?

Answer:
(1) Products warranty
1301-X161 1301-161 B TTI TP-3174S2 Touch Digitizer Glass comes with a 1-year guaranty. VICPAS guaranty provides for repair and replacement without any charge during this period. VICPAS reserves the right in its sole discretion to determine the defects received and will take responsibility if there is any defect or damages.
The limited warranty does not cover the following situations:
Notice: VICPAS is not responsible for the following situation:
1. Damages caused by improper handling from clients, including shipping, installation and integration.
2. Damages caused by either natural or human factors after receiving the products.
3. Damage caused by self-repairs, modifications or disassembling of the product.
4. Damage caused by user error, failing to follow normal operation procedures or using paper tools.
(2) Appearance warranty
1. Cosmetic defects should be reported to VICPAS within 6 months after delivery. Should there be any discrepancy, VICPAS is to perform inspection, upon product return, based on the mutually recognized specifications and determine which party is accountable.
2. Cosmetic defects caused by improper handling from clients will not be covered under standard warranty.


Common misspellings: 

1301-X161 1301-61 B TTI TP-3174S2

301-X161 1301-161 B TTI TP-3174S2

1301-X161 1301-161 B TIT TP-3174S2

1301-Xl61 1301-161 B TTI TP-3174S2

1301-X161 1301-161 8 TTI TP-3174S2

1301-X1611 1301-161 B TTI TP-3174S2

1301-X161 1301-161 B TTI TP-31744S2

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Do you want to quickly know the product quotation you need?