Quick Service for Full HMI Parts Replacement
Home / All / Fuji Hakko / Fuji UG Series /

FUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case Cover

FUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case Cover

FUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case Cover
FUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case CoverFUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case CoverFUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case CoverFUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case CoverFUJI UG330H-SC4 Touch Panel Front Overlay Plastic Case Cover
CategoriesFuji UG Series
BrandVICPAS
ModelUG330H-SC4
Warranty365 Days
BrandFUJI
Product LineUG Series
SupplyUG330H-SC4 Touch Screen Glass Repair
Size7.7 inch
modelUG330H-SC4
PartsTouchscreen Panel Protective Film Plastic Case
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Download
Update TimeNov 15,2024
Detail Information

FUJI UG330H-SC4 Touch Screen Panel, Protective Film, Plastic Case Cover and LCD Display Repair Replacement

Order each part separately is available

FUJI UG330H-SC4 Touch Screen Panel, Protective Film, Plastic Case Cover and LCD Display Repair Replacement

FUJI UG330H-SC4 Plastic Case Cover Repair Replacement


10BASE-T for Ethernet Connection (Standard with UG30 (high-performance type)) Compliant with IEEE802.3 Baud rate: 10 Mbps
Cables: 100 Ω unshielded twist-pair,
Category 5, maximum length = 100 m
UG330H-SC4 touchscreen TFT color, 800 × 600 dots, standard, DC power supply, Compliant with CE/UL/cUL
Serial Interface for PLC Connection (D-sub 25-pin, female)
RS-232C, RS-422/485, Asynchronous type, Data length: 7, 8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits; Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115 kbps

Printer Interface for Printer Connection
Compliant with Centronics, half-pitch 20-pin NEC: PR201
EPSON: ESC/P-J84, ESC/P super function, ESC/P24-J84
CBM292/293 printer *1, HP PCL Level 3; Barcode printer MR400
CF Card Interface Compliant with CompactFlashTM

Serial Interface 1, 2 for Screen Data Transfer/External Connection (Modular jack, 8-pin)
RS-232C, RS-422/485 (2-wire connection)
UG00P-MR, Barcode, UG00P-U2, Multi-link 2,
Temperature control network/PLC2Way, UG-link, etc.


VICPAS supply FUJI UG330H-SC4 Touchscreen Panel, Front Overlay, Plastic Shell and LCD display swith. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.





Specifications:

The table below describes the parameters of the FUJI UG330H-SC4 HMI Parts.

Part Number: UG330H-SC4
Display Size: 8 inches
Display Color: Amber
Warranty: 365 days Warranty
Product Line: UG Series
Input Type: Touchscreen Glass
Inrush Current: 25A, 0.7ms
Communication: Ethernet and RS-232
Communication: ControlNet
Average Backlight Life Approx. 40,000h


Related FUJI UG330H Series Flat Panel Part No. :

FUJI UG330H HMI Description Inventory status
UG330H-VS4 FUJI UG330H Touch Screen Panel Glass Overlay Plastic Case In Stock
UG330H-VH4 FUJI UG330H Touch Panel Glass Front Overlay Housing Available Now
UG330H-SC4 FUJI UG330H Touch Digitizer Protective Film Plastic Enclosure In Stock
UG330H-SS4 FUJI UG330H Touchscreen Protective Film Plastic case In Stock
FUJI UG330H Description Inventory status

FUJI UG Series Manuals PDF Download:

  • FUJI UG330H-SS4 User's manual
  • FUJI UG Series User's manual
  • FUJI UG Series Operator Panel Specification List
  • Fuji Programmable Operation Display POD UG Series General Catalog


  • FAQ:

    Question: What is the tip of mounting and dismounting the UG330H-SC4 CF Card?

    Answer:
    1. The CF card interface is provided on the side of the unit.
    What is the tip of mounting and dismounting the UG330H-SC4 CF Card?

    2. Insert the card securely into the interface with the card backside outwards viewed from the rear of the unit as shown below.
    What is the tip of mounting and dismounting the UG330H-SC4 CF Card?
    3. To remove the card, press the eject button. The card pops out.


    Question: What should we note when handling the UG330H-SC4 CF Card?

    Answer:

    • 1. Do not insert or remove the CF card during access. Doing so may destroy data on the CF card. The CF card can be inserted or removed safely when the Main Menu screen is displayed. However, if the [Card Menu] switch is pressed on the Main Menu screen and the CF card operation screen is displayed, it is not possible to insert or remove the CF card. Before mounting or removing the CF card, be sure to check that the CF card is not being accessed.
    • 2. Do not turn the power off or on during access to the CF card.
    • 3. Make a backup copy of the CF card at regular intervals.
    • 4. If a disk error occurs and data read/write operation is disabled, perform a scan disk on Windows and try to restore the disk. If not restored, initialize the CF card. (For information on scan disk and Windows operations, refer to the manual for Windows.)
    • 5. The number of writing times per CF card is limited (approx. 300,000 times).Consequently, frequent writing at short intervals may shorten service life of the CF card. To use the CF card for saving sampling data, check the setting for sampling time. Also, avoid repeated writing using a CYCLE macro command.


    Question: What is the FUJI UG330H-SC4 Repair Kit price?

    Answer:Submit a fast quote, send VICPAS an email for best price.


    Common misspellings: 

    UG330HSC4
    UG330H-S4
    G330H-SC4
    UG30H-SC4
    UG33H-SC4
    UG330-SC4
    U330H-SC4
    UG30H-SC4

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web