TP-3502S1 TP-3502S1F0 Touch Screen Monitor Replacement
| Share | |
|---|---|
| Categories | HMI Touch Screen Panel |
| Trademark/Brand | VICPAS |
| Model | TP-3502S1 TP-3502S1F0 |
| Brand | Vicpas |
| LCD Type | TFT |
| Shipping Time | 3-5 Days |
| Supply Parts | Touch Membrane |
| Environment | Free From Corrosive Gases |
| Size | 5.7'' |
| FOB port | Guangzhou, Shenzhen, Hongkong |
| Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, Credit Card |
| Update Time | Dec 5,2025 |
TP-3502S1 TP-3502S1F0 Touch Digitizer Glass Replacement
Transport
Despite the robust design of the unit, Beckhoff HMI TP-3502S1 TP-3502S1F0 Touch Membrane is sensitive to strong vibrations and impacts. During transport, your Industrial PC should therefore be protected from excessive mechanical stress. Therefore, please use the original packaging. TP-3502S1 TP-3502S1F0 Touch Screen Monitor Danger of damage to the unit! Warning If the device is transported in cold weather or is exposed to extreme variations in temperature, make sure that moisture (condensation) does not form on or inside the device. Prior to operation, Beckhoff Touch Panel TP-3502S1 TP-3502S1F0 Touch Digitizer Glass must be allowed to slowly adjust to room temperature. Should condensation occur, a delay time of approximately 12 hours must be allowed before the unit is switched on. Vicpas offers TP-3502S1 TP-3502S1F0, Touch Screen Display global transportation, high quality, and a 1-year warranty. If there are any transportation issues, please contact Vicpas at any time.
Specifications:
The table below describes the parameters of TP-3502S1 TP-3502S1F0 Touch Screen Panel.
| Storage Temperature: | -25 °C ... +65 °C |
| Cooling Method: | Natural Air Cooling |
| Operating Temperature: | 0 °C ... +55 °C |
| Brand: | Vicpas |
| Size: | 5.7'' |
| Light Transmission: | Above 75% |
| Environment: | Free From Corrosive Gases |
| Warranty: | 365 Days |
| Relative Humidity: | 95% |
| LCD Type: | TFT |
Related VICPAS HMI Part No. :
| VICPAS HMI | Description | Inventory status |
| VICPAS HMI | Description | Inventory status |
FAQ:
Question: What should I pay attention to when installing TP-3502S1 TP-3502S1F0 HMI Touch Glass?
Answer:
• Position the Panel PC in such a way that reflections on the screen are avoided as far as possible.
• Use the position of the screen as a guide for the correct installation height; it should be optimally visible for the user at all times.
• The Panel PC should not be exposed to direct sunlight.
• When the unit is in its mounting position, the ventilation openings must not be obstructed.
• Extreme environmental conditions should be avoided as far as possible. Protect the Panel PC from dust, moisture and heat.
• The ventilation slots of the Panel PC must not be covered.
Question: What should I do in the event of TP-3502S1 TP-3502S1F0 Touchscreen malfunction?
Answer: This is because poor or missing functional earth of the device or poor or missing ground connection of the user. The solution is establish functional earth or the user stand on the floor with normal shoes.
Common misspellings:
TP-35021 TP-3502S1F0TP-3502S1 TP3502S1F0
TP-3502S1 TP-3502S11F0
TP-3502S1 TP-3502S1FO
TP-3502S1 TP-352S1F0
- Loading...
- Mobile Phone
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Mobile Phone
- *Title
- *Content
