EATON CUTLER-HAMMER PN 63-00742-00 REV.01 BS 5169 Eaton Cutler-Hammer PanelMate PowerPro 1775K PMPP 1700 92-01941-00 Switch Membrane

1. Never use foreign objects to activate Cutler Hammer Panels EATON CUTLER-HAMMER PN 63-00742-00 REV.01 BS 5169 Eaton Cutler-Hammer PanelMate PowerPro 1775K PMPP 1700 92-01941-00 Switch Membrane. Use a hand, gloved hand or stylus. Foreign objects (such as a screwdriver) may cause damage to the touchscreen or scratch the front panel reducing visibility of the display.
2. Use a light touch to activate the touchscreen. Touchscreen activation does not require the same force necessary to activate a mechanical switch.
3. Disconnect Cutler-Hammer EATON CUTLER-HAMMER PN 63-00742-00 REV.01 BS 5169 Eaton Cutler-Hammer PanelMate PowerPro 1775K PMPP 1700 92-01941-00 Terminal Keypad from the power outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
4. Do not remove or insert the CompactFlash memory card while the PanelMate ePro PS unit is powered up. Doing so may cause damage to the CompactFlash memory and/or processor board.
5. Keep this equipment away from condensing humidity.
6. Put Cutler Hammer Panels EATON CUTLER-HAMMER PN 63-00742-00 REV.01 BS 5169 Eaton Cutler-Hammer PanelMate PowerPro 1775K PMPP 1700 92-01941-00 Operator Keyboard on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection cooling. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8. Always install the unit in a vertical orientation for proper cooling.
9. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
10. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
11. All cautions and warnings on the equipment should be noted.