Quick Service for Full HMI Parts Replacement
Home / All / EATON Micro Panel / Cutler-Hammer Panelmate / Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Digitizer Replacement

Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Digitizer Replacement

Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Digitizer Replacement
Share
CategoriesCutler-Hammer Panelmate
BrandVICPAS
ModelEaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15
Product LineCutler-Hammer Panelmate
Warranty1 Year
Shipping Time3-5 Days
Supply PartsTouch Screen Tablet
EnvironmentFree From Corrosive Gases
BrandVicpas
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Detail Information

Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Screen Panel Repair


Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Screen Monitor Replacement

1. Never use foreign objects to activate Eaton Panelmate Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Digitizer Glass. Use a hand, gloved hand or stylus. Foreign objects (such as a screwdriver) may cause damage to the touchscreen or scratch the front panel reducing visibility of the display.
2. Use a light touch to activate the touchscreen. Touchscreen activation does not require the same force necessary to activate a mechanical switch.
3. Disconnect Eaton Cutler Hammer Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Screen Film from the power outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
4. Do not remove or insert the CompactFlash memory card while the PanelMate ePro PS unit is powered up. Doing so may cause damage to the CompactFlash memory and/or processor board.
5. Keep this equipment away from condensing humidity.
6. Put Cutler Hammer Panels Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 HMI Touch Glass on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection cooling. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8. Always install the unit in a vertical orientation for proper cooling.
9. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
10. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
11. All cautions and warnings on the equipment should be noted.




Specifications:

The table below describes the parameters of Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Panel.

Light Transmission: Above 75%
Operating Temperature: 0 °C ... +50 °C
Shipping Time: 3-5 Days
Storage Temperature: -20 °C ... +60 °C
Environment: Free From Corrosive Gases
Product Line: Cutler-Hammer Panelmate
Brand: Vicpas
Cooling Method: Natural Air Cooling
Relative Humidity: 95%
Warranty: 365 Days


Related Eaton Cutler-Hammer Panelmate Part No. :

Cutler-Hammer Panelmate HMI Description Inventory status
Cutler-Hammer Panelmate HMI Description Inventory status

Eaton Cutler-Hammer Panelmate Manuals PDF Download:

  • Operator Interface Catalog.pdf
  • PanelMate Series 1000 Product Manual.pdf
  • Cutler Hammer Eaton MM PM10300C Datasheet.pdf
  • PanelMate 5000 Series.pdf
  • PanelMate Power Pro 5000 Models 5785K, 5785T, 5485K.pdf
  • PM 1700 touchpad express setup updated.pdf
  • Eaton Cutler Hammer 1570KHX PM1500 Power Series Datasheet.pdf

  • FAQ:

    Question: What is the Offline Mode Menu used for?

    Answer: The Offline Mode Menu is a built-in utility interface that allows users to access diagnostic, setup, and maintenance functions on the PanelMate unit. In Offline Mode, users can perform operations such as keypad or touchscreen testing, display adjustment, system diagnostics, and other troubleshooting tasks without affecting normal machine operation.
    For keypad units, Offline Mode can be entered by pressing the upper two control buttons simultaneously after power-up diagnostics are completed. For touchscreen units, Offline Mode can be accessed by pressing the lower-right corner of the touchscreen during startup.
    What is the Offline Mode Menu used for?


    Question: Do I need to press harder when operating the touchscreen with gloves?

    Answer: No. Eaton Cutler-Hammer 7685T-15 3-2369-001B 7685ST-15 Touch Membrane is designed for both finger and gloved operation and does not require strong actuation force like a mechanical switch. A light touch provides the same response as a heavy press, helping ensure comfortable and reliable operation.


    Common misspellings: 

    Eaton Cutler-Hammer 768T-15 3-2369-001B
    Eaton Cutler-Hammer 7685T-15 3-22369-001B
    Eaton Cutler-Hammer 7685T-15 3-2396-001B
    7685ST-115
    768ST-15
    76885ST-15
    Review
    • Loading...
    Please send your message to us
    *Email
    Phone
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Phone
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web