Quick Service for Full HMI Parts Replacement
Home / All / Allen Bradley / Allen Bradley membrane keyboard /

2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair

2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair

2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair
2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair
CategoriesAllen Bradley membrane keyboard
BrandVICPAS
Model2707-V40P1
Warranty180 Days
BrandRockwell Automation Allen Bradley
Product LineDTAM Plus
SupplyDTAM Plus Terminals Membrane keypad
model2707-V40P1
PartsKeypad Switch Repair LCD Display
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Update TimeMar 29,2024
Detail Information

2707-V40P1 DTAM Plus Terminals Membrane Keypad and LCD Display Repair Replacement


2707-V40P1 DTAM Plus Terminals Membrane Keypad and LCD Display Repair Replacement


The 2707-V40P1 keys on the DTAM Plus keypad are color coded by function. Blue 2707-V40P1 keys are for navigation and operator responses; dark grey keys control display and format; and light grey keys are for numeric entry.


The configurable communications port of the DTAM Plus 2707-V40P1 supports RS-485 or RS-232. Use RS-485 to communicate with SLC processors over the Allen-Bradley DH485 network as:
• one of 32 nodes on a multidrop network
• direct connection to a single SLC processor or the 1746-BAS module.
Communication via the 1746-BAS module provides direct backplane access and faster data throughput.
Use RS-232 to communicate point-to-point DF1 to Channel 0 of the PLC-5 processors. You can also use RS-232 to download/upload DTAM Plus application programs or to use the DTAM Plus in Terminal mode.


The DTAM Plus Term option on the Function Menu lets you set communication and display parameters for using the DTAM Plus 2707-V40P1 in terminal mode. Terminal Mode disables execution of the application program and enables the DTAM Plus to function as a terminal device. In DTAM Plus Terminal mode, the DTAM Plus displays any ASCII data received through the communications port. The ASCII codes associated with the keys on the DTAM Plus keypads are transmitted through the communications port when a key is pressed. To activate terminal mode, you must set DIP switch SW1-5 to ON and reset the device. The 2707-V40P1 display is cleared and ready to display received data.



  Contact Best Price  


Specifications:

The table below describes the parameters of the DTAM Plus 2707-V40P1 terminals Parts.

Part Number : 2707-V40P1
Software FactoryTalk
Display ColorAmber
Warranty: 180 days Warranty
Product Line:DTAM Plus
Input Type:Keypad
Mounting position: vertical
Communication: Ethernet and RS-232
Communication:ControlNet


Related Allen Bradley DTAM Plus Terminals Part No. :

DTAM Plus HMI Description Inventory status
2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair Kit In Stock
2707-V40P1R Rockwell DTAM Plus Terminals Membrane Keyboard Replacement Available Now
2707-V40P2 Allen Bradley DTAM Plus Membrane Keypad Repair In Stock
2707-V40P2D DTAM Plus Allen Bradley Keypad Repalcement Available Now
2707-V40P2N DTAM Plus Membrane Switch Replacement Kit Available Now
2707-V40P2NR AB DTAM Plus Operator Panel Keypad Repair In Stock
2707-V40P2R DTAM Plus Membrane Keypad Switch Repair Kit Available Now
AB DTAM Plus Description Inventory status

Allen Bradley DTAM Plus Manuals PDF Download:

  • DTAM Programming Software Programming Manual
  • Allen Bradley DTAM Plus Technical Data
  • DTAM Plus Operator Interface Module Installation Instructions
  • DTAM Plus Getting Started User Manual

  • FAQ:

    Question: How to apply power to the Rockwell Allen Bradley DTAM Plus 2707-V40P1?

    Answer:
    1. Connect the ground, neutral, and hot lines as shown below. Verify the connections by checking the power supply label on the back of the DTAM Plus.
    How to apply power to the Rockwell Allen Bradley DTAM Plus 2707-V40P1?
    2. Apply power. The DTAM Plus performs a powerup sequence.


    Question: How to connect the DTAM Plus terminal 2707-V40P1 to an RS-485 device?

    Answer:
    1. Make sure that the power to the DTAM Plus is off.
    2. Use the proper cabling to connect the DTAM Plus communications port to the port of the controller (PLC-5 channel 0 or SLC 5/03 or SLC 5/04 RS-232 port).
    • Use cable, Catalog No. 2707-NC4 for PLC-5 channel 0 RS-422 connection
    • Use cable, Catalog No. 2707-NC5 for PLC-5 channel 0 RS-232 connection. The 2707-NC5 cable converts the signals from the RS-485 port to RS-232 levels.
    • Use cable, Catalog No. 1747-CP3 for SLC 5/03, 5/04, 5/05 port connection
    If you need to make your own cable, refer to the connection diagrams in Appendix B. The maximum cable length is 200 feet (60.8 meters). Important: The DH-485 network cable requires proper shielding, grounding, and termination. Refer to Data Highway / Data Highway Plus / Data Highway-485 Cable Installation Manual (Pub. No. 1770-6.2.2).
    3. The DH-485 connectors are not electrically isolated. If electrical isolation is required, use Link Couplers (Catalog No. 1747-AIC) shown above.
    How to connect the DTAM Plus terminal 2707-V40P1 to an RS-485 device?
    4. Make sure that the communication parameters of the DTAM Plus terminal match the host device.
    5. Apply power and verify that communications are established.


    Question: What is the 2707-V40P1 DTAM Plus HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Common misspellings: 

    207-V40P1
    2707-40P1
    2707V40P1
    2707-V04P1
    2707-V4P01
    2707--V40P1
    2707-V40P11


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?