Hakko V712S Touchscreen V712SD Film Housing Repair
Hakko Monitouch V712S V712SD Touch Screen Panel, Protective Film, Plastic Case Cover and LCD Display Repair Replacement
Order each part separately is available
V712S V712SD Plastic Case Housing:
When the V7 series V712S V712SD Front Overlay Touch Panel Housing HMI is connected to a printer, a screen hard copy, data sheet or sampling data can be printed. To connect a printer with parallel interface, insert the cable into the printer connector (PRINTER); to connect a printer with serial interface, insert the cable into a modular jack (MJ1/MJ2). When the V7 series is equipped with the communication interface unit CU-04 is mounted, PROFIBUS-DP communications can be performed.
V712S V712SD Touch Screen and Protective Film:
The V7 series V712S V712SD Plastic Shell Touchscreen Panel Overlay HMI updates the display when the read data (V7 series ← PLC) is changed. The V7 series V712S V712SD Touch Screen Protective Film Plastic Case HMI reads data from the PLC memory addresses that are allocated to the items placed on the screen, such as lamp parts or counter parts. When switch data or counter setting data on the V7 series V712S V712SD Hmi Panel Glass Protective Film Plastic Housing Terminal should be written, the V7 series V712S V712SD issues a write command to the PLC and writes the output data to the PLC memory. These operations are automatically performed on the V7 unit and no special communication program is required on the PLC side.The V7 series V712S V712SD Touch screen panel glass front overlay plastic cover hmi that supports T-LINK communications can perform long-distance high-speed data transmission with the Fuji Electric's PLC MICREX-F series.
VICPAS supply Hakko Monitouch V712S V712SD Touchscreen Panel, Protective Film, Plastic Case cover and LCD display. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
The table below describes the parameters of the Hakko Monitouch V712S V712SD HMI Parts.
|Part Number :||V712S V712SD|
|Display Size:||12 inches|
|Warranty:||365 days Warranty|
|Product Line:||Monitouch V7 Series|
|Input Type:||Touchscreen Glass|
|Communication:||Ethernet and RS-232|
Related Hakko Monitouch V7 Series Flat Panel Part No. :
|Hakko V7 Series||Description||Inventory status|
|V712S||Hakko Monitouch V712 Series Touchscreen Film Case Replacement||In Stock|
|V712SD||Hakko Monitouch V712 Series Touch Panel Glass Front Overlay Plastic Case||Available Now|
|V712iS||Hakko Monitouch V712 Series Touchscreen Overlay Housing Replacement||In Stock|
|V712iSD||Hakko Monitouch V712 Series Touchscreen Film Case Replacement||In Stock|
|V712SM||Hakko Monitouch V712 Series Touchscreen Front Overlay Plastic Case||In Stock|
|V712SMD||Hakko Monitouch V712 Series Touch Screen Front Overlay Plastic Case||Available Now|
|V712iSM||Hakko Monitouch V712 Series Touch Membrane Overlay Plastic Shell||Available Now|
|V712iSMD||Hakko Monitouch V712 Series HMI Touch Screen Front Film Housing||In Stock|
|Monitouch V7 HMI||Description||Inventory status|
Hakko Monitouch V7 Series Manuals PDF Download:
Question: What is the procedure of V712S V712SD Battery Mounting?
1. Turn the unit off.
2. Slide the battery holder cover in the direction of the arrow as shown in the left illustration below to open it.
3. Check that the battery is securely attached to the backside of the cover, and connect the battery connector.
4. Close the battery holder cover.
5. Enter a date five years from now for “Battery replacement” on the sticker on the battery holder.
* The battery status is output to the internal memory $s167 of the V7 series. If the battery voltage drops before five years has elapsed, replace the battery immediately.
6. Turn on the power to the V7 unit and check that the battery is correctly mounted on the Main Menu screen.
When the battery is not connected, the [SRAM/Clock] switch blinks and the message “Battery not set” is displayed at the bottom left corner.
When the battery is correctly connected, the [SRAM/Clock] switch goes out and the message is cleared.When the battery voltage has dropped, the message “Brownout Battery” is displayed.
Question: How to check V712S V712SD Print?
1. Connect the V7 unit to the printer.
2. Press the [Printer Check] switch. The test is successful when a test page is printed out without problem.
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service