Quick Service for Full HMI Parts Replacement
Home / All / Sigmatek HMI /

SIGMATEK ETT 312 ETT 352 ETT 353 Touchscreen Panel

SIGMATEK ETT 312 ETT 352 ETT 353 Touchscreen Panel

Detail Information

SIGMATEK Einbauterminal ETT 312 ETT 352 ETT 353 Front Overlay Touch Screen Glass

Order each part separately is available

SIGMATEK Einbauterminal ETT 312 ETT 352 ETT 353 Front Overlay Touch Screen Glass Repair Replacement

The ETT 312 Touch Digitizer Glass Terminal is a touch operating panel with a 3.5” TFT color display. The ETT353 resistive touch screen serves as the input medium for process data and parameters. To save energy, the ETT 353 display is deactivated in sleep mode. When the ETT312 screen surface is touched, the ETT 312 Touchscreen Panel Glass terminal is activated and then deactivated a few minutes after the last input. With the LASAL SCREEN mask editor, graphics can be created on the PC, then stored and displayed on the terminal. Data is exchanged over CAN bus. VICPAS supply SIGMATEK Einbauterminal ETT312, ETT352, ETT353 touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty.

The ETT 352 Touch Screen Terminal is an intelligent terminal for the programming and visualization of automated processes. As a room operating device, the ETT352 Touch Panel terminal is equipped with a temperature sensor. A resistive touch screen serves as the input medium for process data and parameters. The output is shown on a 3.5" TFT color display. To save energy, the display is deactivated in sleep mode. When the ETT352 screen surface is touched, the ETT 352 HMI Panel Glass terminal is activated and then deactivated a few minutes after the last input. With the LSE mask editor, graphics can be created on the PC, then stored and displayed on the terminal. Data is exchanged over a CAN bus.


Specifications:

The table below describes the parameters of the Sigmatek ETT 312 ETT 352 ETT 353 Touchscreen Panel Protective Film.

Part Number : ETT312/ETT352/ETT353
Product Line: Sigmatek
Screen diagonal 3.5 in
Warranty: 365 Days Warranty
Input Power 24 VDC
Display Type: TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type: RS232
Storage -20 to 70°C


Related Sigmatek Panel Part No. :

Einbauterminal Description Inventory status
ETT 311 Sigmatek Einbauterminal Touch Screen Repair In Stock
ETT 321 Einbauterminal Sigmatek Touch Panel Replacement Available Now
ETT 312 Sigmatek Einbauterminal Touchscreen Repair In Stock
ETT 352 Einbauterminal Sigmatek HMI Touch Screen Glass Available Now
ETT 353 Sigmatek Einbauterminal Touch Screen Panel Repair In Stock
ETT 412 Sigmatek Einbauterminal Touch Membrane Repair In Stock
ETT 731 SIGMATEK Einbauterminal HMI Touch Glass Repair In Stock
ETT 771 Sigmatek Einbauterminal Touch Digitizer Glass Repair Available Now
ETT 1561 Sigmatek Einbauterminal HMI Panel Glass Replacement Available Now
ETT 1962 Einbauterminal SIGMATEK Touch Screen Monitor Repair In Stock
SIGMATEK HMI Description Inventory status

SIGMATEK Control Panel Manuals PDF Download:

  • Sigmatek ETT312 Controller User Manual
  • Sigmatek ETT312 HMI Datasheet
  • Sigmatek ETT352 Controller User Manual
  • Sigmatek ETT352 HMI Datasheet
  • Sigmatek ETT353 Controller User Manual
  • Sigmatek ETT353 HMI Datasheet

  • FAQ:

    Question:What are the functions of Sigmatek ETT 312 ETT 352 ETT 353 Touch Protective Foil?

    Answer: To extend the lifespan of the touch screen as must as possible, a protective foil is places of the touch field.
    The foil adds the following properties.
    • High chemical stability
    • Hard surface
    • Splitter protection
    • Easy to clean
    • Matt anti-reflective surface


    Question:What is the price of SIGMATEK ETT 312 ETT 352 ETT 353 Front Overlay and Touch Screen Panel?

    Answer: Submit a quote request, send us an email for our best price.


    Question:How to Cleaning SIGMATEK ETT 312 ETT 352 ETT 353 Touch Screen Panel Glass?

    Answer:

    CAUTION!
    Before cleaning the touch screen, the terminal must first be turned off to avoid unin-tentionally triggering functions or commands!

    The SIGMATEK ETT 312 ETT 352 ETT 353 terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the cloth, a screen-cleaning solution such as an antistatic foam, water with detergent or alcohol should be used. First spray the cleaning fluid on the cloth and not directly on the terminal. The cleaning solution should not be allowed to reach the terminal electronics, for example, through the ventilation slots.


    No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can scratch or damage the touch screen may be used.


    If the terminal is soiled with toxic or acidic chemicals, quickly and carefully clean the termi-nal to prevent corrosion.


    To ensure the optimal function of the terminal, the touch screen should be cleaned at regular intervals!

    To extend the lifespan of the touch screen as much as possible, using the fingers to operate the terminal is recommended.

    Common misspellings: :

    ETT12
    ETT31
    ETT312
    TET352
    ETT35Z
    E77353
    ETT3353
    ETT3553


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web