TT10240A30H S4085C11P4Z3AS10B7M21442 Touch Screen Monitor
TT10240A30H S4085C11P4Z3AS10B7M21442 TTI HMI Touch Panel Repair Replacement
The enclosure support to fix the TT10240A30H S4085C11P4Z3AS10B7M21442 touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The enclosure edge must be between the View area and the guaranteed active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the TT10240A30H S4085C11P4Z3AS10B7M21442 touch screen panel glass are conductive so do not touch any metal parts after mounting.
TT10240A30H S4085C11P4Z3AS10B7M21442 Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the TT10240A30H S4085C11P4Z3AS10B7M21442 panel when cleaning, again for safety reasons.
The table below describes the parameters of the TT10240A30H S4085C11P4Z3AS10B7M21442 Touch Screen.
|Product Line:||TTI Touch Panel|
|Number of Touches:||Single|
|Operating Temperature (*):||-5˚C to 60˚C|
|Storage Temperature:||-20˚C to 70˚C|
|Touch Size:||8.4 inch|
|Response time:||≦ 30ms|
|Operating Humidity:||20% to 85% RH|
|Tail Options:||FPC tail|
|Storage Humidity:||10% to 90% RH|
Related TTI Touch Screen HMI Part No. :
|TTI Touch Screen||Description||Inventory status|
|TT05240A10||TTI Touch Screen Glass Replacement||In Stock|
|TT05240A40||TTI Touch Screen Panel Replacement||Available Now|
|TT06150A40F S5156E18P5Z3AD61FB010192||TTI HMI Touchscreen Repair Part||In Stock|
|TT10060A40 S612S18P6L3AS1164400145||TTI HMI Touch Screen Glass Repair||Available Now|
|TT10240A30||TTI Touch Screen Panel Replacement||In Stock|
|TT10240A30H S4085C11P4Z3AS10B7M21442||TTI Touch Membrane Replacement||In Stock|
|TT10240A31H S4064C11P4Z3AS1OE4220518||TTI HMI Touch Glass Replacement||In Stock|
|TT10340A30H S41084005FA77B320306||TTI HMI Panel Glass Replacement||Available Now|
|TT11350A90H S5150E28P5L3AS1UB4450612||TTI Touch Digitizer Glass Repair||Available Now|
|TT11350A90H S5150E28P5L3AS1YCB850407||TTI Touch Screen Monitor Repair||In Stock|
|TT11350A90H S5150E28P5L3AS1YCB850909||TTI HMI Touch Panel Replacement||Available Now|
|TT11350A90H S5171E28P5L3AS1WC7L30544||TTI HMI Touchscreen Repair Part||In Stock|
|TTI Touch Panel||Description||Inventory status|
Question: What is the warranty of the TT10240A30H S4085C11P4Z3AS10B7M21442 HMI Panel Glass?
(1) Products warranty
TT10240A30H S4085C11P4Z3AS10B7M21442 Touch Digitizer Glass comes with a 1-year guaranty. VICPAS guaranty provides for repair and replacement without any charge during this period. VICPAS reserves the right in its sole discretion to determine the defects received and will take responsibility if there is any defect or damages.
The limited warranty does not cover the following situations:
Notice: VICPAS is not responsible for the following situation:
1. Damages caused by improper handling from clients, including shipping, installation and integration.
2. Damages caused by either natural or human factors after receiving the products.
3. Damage caused by self-repairs, modifications or disassembling of the product.
4. Damage caused by user error, failing to follow normal operation procedures or using paper tools.
(2) Appearance warranty
1. Cosmetic defects should be reported to VICPAS within 6 months after delivery. Should there be any discrepancy, VICPAS is to perform inspection, upon product return, based on the mutually recognized specifications and determine which party is accountable.
2. Cosmetic defects caused by improper handling from clients will not be covered under standard warranty.