Quick Service for Full HMI Parts Replacement
Home / All / Touch Screen Panel supplier / TTI Touch Panel /

1302-254 A TTI 1302-254 C TTI MMI Touch Screen Repair

1302-254 A TTI 1302-254 C TTI MMI Touch Screen Repair

1302-254 A TTI 1302-254 C TTI MMI Touch Screen Repair
1302-254 A TTI 1302-254 C TTI MMI Touch Screen Repair1302-254 A TTI 1302-254 C TTI MMI Touch Screen Repair
CategoriesTTI Touch Panel
BrandVICPAS
Model1302-254 A TTI 1302-254 C TTI
Warranty365 Days
Shipping2-4 workdays
BrandTTI Touch Screen
Touch screen panel typeResistance touch screen
Display Size8.4 inch
Supply PartsTTI Touchscreen Panel Glass HMI Spare Part
Part Number1302-254 A TTI 1302-254 C TTI
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Download DOCpdf iconrar icon
Update TimeMar 29,2024
Detail Information

1302-254 A TTI 1302-254 C TTI Touch Screen Glass Repair Replacement


1302-254 ATTI 1302-254 C TTI Touch Screen Panel repair replacement

1302-254 A TTI 1302-254 C TTI Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the 1302-254 A TTI 1302-254 C TTI panel when cleaning, again for safety reasons.


The enclosure support to fix the 1302-254 A TTI 1302-254 C TTI touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The enclosure edge must be between the View area and the guaranteed active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the 1302-254 A TTI 1302-254 C TTI touch screen panel glass are conductive so do not touch any metal parts after mounting.




Specifications:

The table below describes the parameters of the 1302-254 A TTI 1302-254 C TTI Touch Screen.

Product Line: TTI Touch Panel
Warranty: 1-Year Warranty
Number of Touches: Single
Operating Temperature (*): -5˚C to 60˚C
Storage Temperature: -20˚C to 70˚C
Touch Size: 8.4 inch
Response time: ≦ 30ms
Operating Humidity: 20% to 85% RH
Tail Options: FPC tail
Storage Humidity: 10% to 90% RH


Related TTI Touch Screen HMI Part No. :

TTI Touch Screen Description Inventory status
1302-137 A TTI TTI Touch Screen Glass Replacement In Stock
1302-140-C-TTI TTI Touch Screen Panel Replacement Available Now
1302-254 A TTI TTI HMI Touchscreen Repair Part In Stock
1302-800 C TTI (B) 1302-X801 01-NA TTI HMI Touch Screen Glass Repair Available Now
PN 1302-802 1302-X801 04 1302-x801 01-N4 TTI Touch Screen Panel Replacement In Stock
1302-X311-02-NA TTI Touch Membrane Replacement In Stock
1401-X401 02 TTI HMI Touch Glass Replacement In Stock
1501-151 A TTI 120-X111 07 DOMINO HMI 226-183 TTI HMI Panel Glass Replacement Available Now
S5151H7BS113A6707934 TTI Touch Digitizer Glass Repair Available Now
S6190E28P613AS1CD2210032 TTI Touch Screen Monitor Repair In Stock
T010-1302-T462 TTI-15045 TTI HMI Touch Panel Replacement Available Now
T010-7201-X031-05 TTI-110423-7201T120-156-000402 TTI HMI Touchscreen Repair Part In Stock
TTI Touch Panel Description Inventory status

FAQ:

Question: What is the warranty of the 1302-254 A TTI 1302-254 C TTI HMI Panel Glass?

Answer:
(1) Products warranty
1302-254 A TTI 1302-254 C TTI Touch Digitizer Glass comes with a 1-year guaranty. VICPAS guaranty provides for repair and replacement without any charge during this period. VICPAS reserves the right in its sole discretion to determine the defects received and will take responsibility if there is any defect or damages.
The limited warranty does not cover the following situations:
Notice: VICPAS is not responsible for the following situation:
1. Damages caused by improper handling from clients, including shipping, installation and integration.
2. Damages caused by either natural or human factors after receiving the products.
3. Damage caused by self-repairs, modifications or disassembling of the product.
4. Damage caused by user error, failing to follow normal operation procedures or using paper tools.
(2) Appearance warranty
1. Cosmetic defects should be reported to VICPAS within 6 months after delivery. Should there be any discrepancy, VICPAS is to perform inspection, upon product return, based on the mutually recognized specifications and determine which party is accountable.
2. Cosmetic defects caused by improper handling from clients will not be covered under standard warranty.


Common misspellings: 

1302-254 A TTI 1302-25 C TTI

132-254 A TTI 1302-254 C TTI

1302-254 A TTI 13022-54 C TTI

1320-254 A TTI 1302-254 C TTI

1302-254 A TTI l302-254 C TTI

1302-Z54 A TTI 1302-254 C TTI

1302-254 A TTI 13002-254 C TTI

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Do you want to quickly know the product quotation you need?