TT12240A20H S4104C11P4Z3AD TTI Touch Screen Monitor
TT12240A20H S4104C11P4Z3AD TTI HMI Touch Panel Repair Replacement
The enclosure support to fix the TT12240A20H S4104C11P4Z3AD touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The enclosure edge must be between the View area and the guaranteed active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the TT12240A20H S4104C11P4Z3AD touch screen panel glass are conductive so do not touch any metal parts after mounting.
TT12240A20H S4104C11P4Z3AD Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the TT12240A20H S4104C11P4Z3AD panel when cleaning, again for safety reasons.
The table below describes the parameters of the TT12240A20H S4104C11P4Z3AD Touch Screen.
|Product Line:||TTI Touch Panel|
|Number of Touches:||Single|
|Operating Temperature (*):||-5˚C to 60˚C|
|Storage Temperature:||-20˚C to 70˚C|
|Touch Size:||10.4 inch|
|Response time:||≦ 30ms|
|Operating Humidity:||20% to 85% RH|
|Tail Options:||FPC tail|
|Storage Humidity:||10% to 90% RH|
Related TTI Touch Screen HMI Part No. :
|TTI Touch Screen||Description||Inventory status|
|TT10340040||TTI Touch Screen Monitor Repair||In Stock|
|TT11350A90H S5190E28P5L3AW19B4290372||TTI Touch Screen Glass Replacement||In Stock|
|TT11350A91H S5171E28P5L3AS15F3270364||TTI Touch Screen Panel Replacement||Available Now|
|TT12240020||TTI HMI Touch Panel Replacement||Available Now|
|TT12240A20 FS4F10401AZ0166370173||TTI HMI Touchscreen Repair Part||In Stock|
|TT12240A20H S4104C11P4Z3AD||TTI HMI Touch Screen Glass Repair||Available Now|
|TT15250A21F S5104E18P5Z3AD13G5170176||TTI Touch Screen Panel Replacement||In Stock|
|TT15340A10F S4150C18P4Z3AD20C7E50075||TTI Touch Membrane Replacement||In Stock|
|TT20240A11H S4070C11P4Z3AS10E4050586||TTI HMI Touch Glass Replacement||In Stock|
|TT21360A10 FS6F14901AA064C030041||TTI HMI Panel Glass Replacement||Available Now|
|TT21360011 FS6F15102AA0558370194||TTI HMI Touchscreen Repair Part||In Stock|
|TT35960A10 S6151S26P6H3AD546C271595||TTI Touch Digitizer Glass Repair||Available Now|
|TTI Touch Panel||Description||Inventory status|
Question: What is the warranty of the TT12240A20H S4104C11P4Z3AD HMI Panel Glass?
(1) Products warranty
TT12240A20H S4104C11P4Z3AD Touch Digitizer Glass comes with a 1-year guaranty. VICPAS guaranty provides for repair and replacement without any charge during this period. VICPAS reserves the right in its sole discretion to determine the defects received and will take responsibility if there is any defect or damages.
The limited warranty does not cover the following situations:
Notice: VICPAS is not responsible for the following situation:
1. Damages caused by improper handling from clients, including shipping, installation and integration.
2. Damages caused by either natural or human factors after receiving the products.
3. Damage caused by self-repairs, modifications or disassembling of the product.
4. Damage caused by user error, failing to follow normal operation procedures or using paper tools.
(2) Appearance warranty
1. Cosmetic defects should be reported to VICPAS within 6 months after delivery. Should there be any discrepancy, VICPAS is to perform inspection, upon product return, based on the mutually recognized specifications and determine which party is accountable.
2. Cosmetic defects caused by improper handling from clients will not be covered under standard warranty.